Command: +VPR
Description:
Values:
Default:
Report Commands:
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
Select DTE/Modem Interface Rate (Turn Off Autobaud)
This command selects the DTE/modem interface rate.
Syntax: +VPR=<rate>
<rate>
Decimal number corresponding to the DTE/modem interface rate where 0 =
autobaud rate determined by processing the AT command, and
1,2,3,4,8,16,24,48,96 correspond to multipliers of 2400 bps to determine the
actual rate:
0 = Autobaud
1 = 2400 bps
2 = 4800 bps
3 = 7200 bps
4 = 9600 bps
8 = 19200 bps
16 = 38400 bps
24 = 57600 bps
48 = 115200 bps
96 = 230400 bps
0
+VPR?
Reports current of selected values.
+VPR=?
Reports supported range of parameter values.
Chapter 3 – Voice Commands
36