Mains Inlet; Serial Port; Pneumatic Connections; Pipeline Inlets - Datex-Ohmeda Aespire View User's Reference Manual

Aespire View

Mains inlet

Serial port

Pneumatic connections

CAUTION

Pipeline Inlets

8-10
Arrow shows the mains power inlet and cord.
The system has an RS-232C electrical interface. The RS-232C
connector allows serial input/output of commands and data. The 15-
pin connector is located on the back of the display unit.
The 15-pin female D connector - Data Communications Equipment
(DCE) configuration:
• Pin 1 - Monitor On/Standby.
• Pin 5 - Signal ground.
• Pin 6 - Receive data.
• Pin 9 - Monitor On/Standby Return.
• Pin 13 - Transmit data.
Use only medical grade gas supplies. Other types of gas
supplies may contain water, oil, or other contaminants
which could affect the operation of the pneumatic system.
The gas supplies provide gas to these optional devices through
internal connections:
• Venturi suction regulator (optional).
• Auxiliary O2 flowmeter (optional).
M1132382