Multitech MultiArrayIII MA3a User Manual page 24

Server farm

Table of Contents

MultiArray User Guide

Connect the power cable to the disk drive ensuring that pin 1 of the cable mates with pin

1 of the drive connector. The power cables are a Y-cable with a small connector for a

floppy disk drive and large connector for a hard disk drive. See Figure 2-15.

Figure 2-15. Y-Power Cable

Note: The Y-cables are labeled from one to nine on all three connectors on each cable. The

power cables are associated with the subsegments of the five segments labeled on the

backplane. The power cable for segment 1 is labeled 1.

Reconnect the data cables to the floppy and CD-ROM drives. See Figure 2-16.

Figure 2-16. Floppy and CD-ROM Drive Data Connections

Table of Contents