SBC Connections
Figure 2-6 shows the two connections between the mux card and the SBC.
Figure 2-6. Ribbon Cable Connections
In this example, connector SHDD6 (40-pin) connects to the 40-pin hard drive connector on the
SBC board installed in segment 6. Connector SFDD6 (34-pin) connects to the 34-pin floppy drive
connector on the SBC board (Figure 2-10 shows the connection between the mux card and a
hard drive on the same segment).
Make all necessary SBC connections, and then proceed with the Disk Drive Installation section
that follows.
Chapter 2 - Installation Quick Start
7
SOCKET
M1
M2
M3
M4
17