Table of Contents
Advertisement
Appendix F – Modem AT Commands
Command:
#CBAn
Values:
Default:
Description:
Command:
#CBDn
Values:
Default:
Description:
Command:
#CBF?
Values:
Default:
Description:
Command:
#CBFR
Values:
Default:
Description:
Command:
#CBIn
Values:
Default:
Description:
Command:
#CBNy=x
Values:
Defaults:
Description:
Command:
#CBPn
Values:
Default:
Description:
64
Callback Attempts
n = 1–255
4
Sets the number of callback attempts that are allowed after passwords have been
exchanged between modems.
Callback Delay
n = 0–255
15
Sets the length of time (in seconds) that the modem waits before calling back the
remote modem.
Callback Failed Attempts Display
N/A
N/A
Requests the number of failed callback passwords since reset or power-up. This
number can be stored to nonvolatile memory using the &W command.
Callback Failed Attempts Reset
N/A
N/A
Resets the number of failed callback passwords to 0. This does not reset the number
stored in nonvolatile memory.
Local Callback Inactivity Timer
n = 1–255
20
Sets the time (in minutes) that the modem waits for a command before forcing the
user to enter the setup password again.
Store Callback Password
y = 0–29
x = password
None
Sets the callback security password for the y memory location. The password must
have 6 to 10 characters, and cannot include the + or - characters.
Callback Parity
n = 0, 1, or 2
0
Sets parity for the callback security messages.
#CBP0
No parity.
#CBP1
Odd parity.
#CBP2
Even parity.
Multi-Tech Systems, Inc. MultiAccess User Guide
Advertisement
Table of Contents
