Multitech MultiAccess MA220 User Manual page 27

Field Name
SMTP Server Address
SMTP Port
Administrator E-mail
SMTP Server User ID
SMTP Password
Retype SMTP Password
Update (button)
Time Server
Add Time Server
Request Interval
Use Daylight Savings
Time
Time Zone
Date Format
Time Format
Update (button)
Reset (button)
Multi-Tech Systems, Inc. MultiAccess User Guide
Administration Screen Field Definitions
Values Description
SMTP Configuration Fields
URL or IP address Domain name or IP address for mail server
(SMTP must be supported on mail server).
Numeric The default SMTP Port number is 25.
Alphanumeric in The administrator's email address. This address
email name format has to be entered in proper user@domain
format. Reasons for sending an e-mail;
MultiAccess is on-line, call logs full,
administrator's e-mail address is changed.
Alphanumeric An additional security identifier for the mail
server, that if required by the mail server is
typically a short unique name or location of the
server.
Alphanumeric Security code for the SMTP Server.
Alphanumeric After the SMTP Password is entered above, an
exactly matching entry must be made here to
validate that password
Click on this button after changes have been
made to the SMTP Server's configuration before
the change take effect.
Time Configuration Fields
URL or IP address Location of time-tracking computer that supports
SNTP. This server is the functional substitute for
a real-time clock in the MultiAccess. It will
contact this server 5 times in 20 seconds. If
contact fails, it will try 5 times again 5 minutes
later. If contact succeeds, the MultiAccess will
update its clock periodically per an interval set in
the Request Interval option.
URL or IP address Used to add a user-supplied time server.
xx days, yy hours, This value (to be set by user) indicates how often
the MultiAccess will update its clock from the
zz minutes
Time Server.
Check box New 2007 dates. Start DST second Sunday in
April. End first Sunday in Nov.
Pull-down listing Indicates the time zone in which the MultiAccess
is located.
Numeric Click on the down arrow to select the date
format.
Alphanumeric Click on the down arrow to select the time
format.
Click on this button to make changes to Time
Configuration settings take effect.
Soft reboot of MultiAccess.
Chapter 4 - Software
27