Setting Ma100-1M Ip Addresses; Resetting Admin Pc To Its Original Ip Address - Multitech MA100-1M Quick Start Manual

Setting MA100-1M IP Addresses

1. In the MA100-1M Administration screen, go to the IP
Configuration fields.
2. Fill in the IP information that applies to your MA100-1M unit.
The fields for "IP Address," "Subnet Mask," "Default
Gateway" and "Name Server" are required. A "Secondary
Name Server" is optional.
3. Click Update. After the Update button has been clicked, it
takes 5 seconds for the unit to update the addresses.

Resetting Admin PC to Its Original IP Address

In "Setting the Admin PC" to the network number of the
MultiAccess, you recorded the original IP address of the
administrator's PC and then reset it to the IP address required to
allow communication with the MA100-1M unit. You may now set
the IP address of the administrator's PC back to its original value
or to any other value that will allow you to communicate with the
MA100-1M at its new IP address.
Quick Start Guide
9