Set Up The Camera On The App - Reolink Argus 2 User Manual

Method 3: Charge the camera with Reolink Solar Panel (needs to be purchased
separately).
Note:
There is only one battery with each camera.
There is a status LED under the micro USB port of the battery, which indicates the
battery charging status.
Green LED
Orange LED

Set up the Camera on the App

Please follow the steps below to do initial setup for the battery-powered cameras
via Reolink App.
Step 1. Power on the camera and wait for it starting up. After hearing a startup
sound, you will hear repeated Ding sounds or "Please run Reolink App, add the
camera and set it up", which means you can scan the UID and start the setup
process.
Note:
1. Please power on the camera by power switch button before initial setup.
(Suits for Argus PT, Argus Eco, Argus 3, Argus 3 pro.)
Reolink Wireless Battery-powered Camera
Fully charged
Charging
12