Sd Card Storage - Reolink Argus 2 User Manual

Warm Tips
The Wi-Fi signal strength of wireless cameras can be interfered with by numerous
factors, such as other Wi-Fi networks around, the distance from the router/hot spot,
walls/obstacles in between, transmitting power of the router/extender, etc.
Make sure that the wireless signal is three bars or at least two bars. One bar signal
is too weak to establish a stable connection. If the Wi-Fi signal strength is low/weak,
you may refer to the following guides to improve the Wi-Fi signal strength of the
wireless camera.
· Shorten the distance between your wireless camera and the router.
· Change the wireless channel on your router to avoid interference from Wi-Fi
networks around.
· Keep the wireless camera away from appliances or electronic devices like a
microwave, computer, wireless router, etc.
· Install the wireless camera to somewhere with fewer walls and obstacles in
between with the router.
· Fasten the antennas on the wireless camera.
· Change a router which has higher wireless transmitting power.
· Install a Wi-Fi extender

SD card Storage

Choose a proper SD card
Please choose a SD card with below specification so it can be compatible with the
camera.
Item
Capacity
Read and Write Speed
Format
Install the Micro SD card (example: Argus 2)
1.Switch off the camera before installing the micro SD card.
Reolink Wireless Battery-powered Camera
Requirement
Up to 128GB (Argus 2; Argus 2E; Argus 3; Argus
Pro; Argus Eco; Argus PT; Reolink Go PT with
the latest firmware version)
Class 10 or higher/ ≥26Mbps
FAT32
76