Reolink RLC-823A - Smart 8MP PTZ PoE Camera Manual

Specs

1. Metal Aluminum Case
2. Daylight Sensor
3. 4 IR LEDs
4. High Definition Lens
5. 3 Spotlights

1. Micro SD Card Slot

1. Power
2. Reset Button
3. Earth Wire
4. Network
5. Waterproof Lid

Setup and Install

Set up the Camera

What's in the Box

Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page.

RLC-823A

Set up the Camera on the App

Here is a guide on how to initially set up the camera via Reolink App.

Step 1. Tap the icon in the top right corner.

Note: If you've enabled the Add Device Automatically option on the App's Settings page, you can tap this device on the Devices page and turn to Step 3 directly.

Step 2. Scan the QR code on the back of the camera. You may tap Light to enable a flashlight when setting up the camera in a dark environment.

If the phone doesn't respond, please tap Input UID/IP and then manually type in the UID (16-digit characters under the QR code of the camera). Then tap Next.

Step 3. Create a login password for your camera. Then tap Next.

Step 4. Name your camera. Then tap Next.

Step 5. Initialization finished! You can start live viewing now.

Install the Camera

Please follow the steps below to install the camera.

Step 1. Drill holes in accordance with the mounting hole template (included in the product box).

Note: Use the drywall anchors included in the package if needed.

Step 2. Install the mount base with screws included in the package.

Notes:
Run the cable through the cable notch on the mount base.
As for the WiFi camera, it is recommended that the antennas be installed upward or horizontally for better WiFi connection.

Step 3. You may control the camera to pan and tilt via Reolink App or Client to change the camera's direction.