Reassembly / Maintenance - WAGNER POWER PAINTER Owner's Manual

Reassembly /
Maintenance
You will need:
Start
• Scrap piece of wood or cardboard
• Lubricant
4
4. Insert the atomizer valve into the
front end of the pump housing.
Place the spray tip onto the pump
housing and turn it clockwise until
it is tightened securely.
English
1
1. Slide the spring onto the front
end of the piston.
Insert the piston into the back
of the pump housing.
5
(a) (b)
5. Turn the sprayer upside-down
while the cup is removed.
Squeeze a small amount of
lubricant into both the intake
(a) and return (b) openings on
the pump housing.
10
2
2. Insert the pump housing
assembly into the front of the
sprayer.
6
6. Plug in the sprayer. Aim
at piece of scrap wood or
cardboard and squeeze the
trigger of the sprayer for 2 to
3 seconds while sprayer is still
inverted.
3
3. Place the locking nut onto
the pump housing. Press in
while turning the locking nut
clockwise.
Do not cross-thread the
locking nut. make certain it
is threaded correctly before
tightening.
7
7. Reassemble and reattach
the filter and suction tube
assembly.
Replace the cup.