Spraying Technique - WAGNER POWER PAINTER Owner's Manual

Spraying
Technique
Adjusting the
Start Start
spray tip:
To prevent an injection hazard,
make sure the sprayer is
unplugged before you adjust the
spray tip. make sure the spray tip
is sufficiently hand tightened.
Never tip the sprayer at more than
a 45º angle when spraying
overhead. material could get into
the motor housing and cause an
electric shock.
1
1. Spraying horizontally (side to side) -
Orient the spray tip as shown.
3
Keep stroke Aproximately
even 10 to 14 inches
Start Pull Move steadily
stroke trigger
3. Keep your arm moving at constant speed and keep the
sprayer at a constant distance from the surface. The
sprayer should be triggered at the beginning of the stroke
and released at the end of the stroke.
7
2
2. Spraying vertically (up and down) -
Orient the spray tip as shown.
4
Release End
trigger stroke
4. Keep the sprayer at a consistent distance to the
surface. This means moving your entire arm back
and forth rather than just flexing your wrist. Overlap
each stroke by 50%.
English