Questions; Call Wagner Technical Service At; Register Your Product Online At: Www.wagnerspraytech.com; Proper Registration Will Serve As Proof Of - WAGNER POWER PAINTER Owner's Manual

Troubleshooting
Problem E: Excessive fogging
Cause
Pressure too high
1.
Holding sprayer too far from work surface
2.
Problem F: Runs and sags in paint
Cause
Arm movement too slow, holding spray gun too close or work
1.
surface, or applying too much paint at one time
Problem G: Material drips from spray tip or guard
Cause
Guard is for safety and cannot be removed. Some dripping is
1.
unavoidable with some paints
Problem H: Material leaking from between spray tip and locking nut.
Cause
1. Spray tip is loose
2. Atomizer valve not positioned properly
3. Worn atomizer valve
4. Eroded pump housing
Problem I: Motor overheats
Cause
1. Seized piston
2. Extension cord too long
3. Operating continuously
Have you tried the recommendations above and are still having problems? In the United States,
to speak to a customer service representative, call our Customer Service at 1-800-328-8251
monday through Friday between 8:00 Am and 4:30 pm Central time.
This unit has no servicable electrical parts.
Do not attempt to service this unit yourself.
Solution
Turn flow control knob clockwise to reduce pressure and flow
Hold sprayer closer to work surface
Solution
See section on spraying (page 7)
Solution
Use a small brush on drips that fall on surface being sprayed. Use a drop cloth
Solution
Tighten securely
Unplug the sprayer, remove the spray tip and reposition the atomizer valve
Replace
Replace the pump housing
Solution
Clean piston
Replace with proper size
Release trigger at the end of a pass, allow to cool.
13

Questions?

Call Wagner Technical Service at:

1-800-328-8251
Register your product online at:
www.wagnerspraytech.com

Proper registration will serve as proof of

purchase in the event your original receipt
becomes misplaced or lost.
English