Prerequisite: Ordering The Did Line - Multitech FaxFinder FF110 Quick Start Manual

Multi-Tech FaxFinder Quick Start

Prerequisite: Ordering the DID Line

To operate the FaxFinder system, you will need a DID (Direct Inward
Dial) line in your office. You must order the DID line from your local
telephone operating company (telco). A DID line allows one phone
line to be associated with multiple directory numbers. However, only
one call can occur on this line at any given time.
DID lines are sold in groups. For example, a telco in New York City
might offer a DID line with a set of 20 directory numbers in the range
of 212-555-4101 through 212-555-4120.
When ordering your DID line, ask the telco representative for these
details about the DID service. These details will be important when
setting up your FF110 Fax Server.
Parameter
Number of digits used
to designate the DID extension
(usually 3, 4, 6, or 7)
Type of "DID Start" used
(wink, immediate, or delay dial)
You will need this information to configure your FaxFinder Server
(see step 8 on page 16).
Getting Started
Value Required by
Telco
7