Changing Admin's Server Password - Multitech FaxFinder FF110 Quick Start Manual

Multi-Tech FaxFinder Quick Start
j. If you both observe the "Waiting for Connect" state and hear the
tones, then the FaxFinder's Modem has been configured
properly.
If either of these is absent, see item #3 "What if the FaxFinder
doesn't answer a fax call?" in the "Troubleshooting" chapter of
the Administrator User Guide.

10. Changing Admin's Server Password

a. In the Password Administration screen, enter a new User ID
and Password for the FaxFinder Administrator (something other
than "admin" and "admin"). This User ID and password are to
be used in that person's capacity as administrator. Then re-
enter the password in the "Confirm Password" field. Passwords
can be as short as 1 character, as long as 40 characters, and
are case-sensitive. Use a password that is non-obvious and
that cannot be guessed easily.
Server Installation
21