Multitech FaxFinder FF120 Cabling Manual page 3

FaxFinder Cabling Guide
Introduction
This guide describes the hardware setup of the FF120, FF220,
FF420, and FF820 FaxFinder units, that is, how to connect their
cables for operation, and some preliminary considerations for
their inter-operation with PBX units. Instructions for software
setup can be found in the following chapters of the Administrator
User Guide:
Chapter 3: Server Installation,
Chapter 5: FaxFinder Client Software Configuration, and
Chapter 8: Device Manager Installation & Operation.
Mechanical Mounting
The FF120 & FF220 FaxFinder can be surface mounted with
screws spaced according to the dimensions shown. The FF420
& FF820 are normally table-top units but can be rack-mounted.
FaxFinder R
V.34 Fax Server
6.2"
15.7 cm
MultiTech Systems, Inc.
Getting Started
5.3"
13.5 cm
3