Multitech FaxFinder FF120 Cabling Manual page 11

FaxFinder Cabling Guide
Cabling Process
Summary: Place the FaxFinder in a convenient location, and
then connect it to your AC power outlet and Ethernet.
1. Connect FaxFinder to AC Outlet.
A. FF-120/220 Power. Plug the DC power transformer into
a power outlet or power strip. Secure the other end to
the Power Receptacle on your FaxFinder. Secure the
power cord to the connector with the lock nut. (Builds of
FF-120/220 for outside North America have a 2-piece
power connection.)
Caution: Use only the DC power transformer supplied
with the FaxFinder. Use of any other
transformer voids the warranty and can
damage the FaxFinder.
LINE 1 LINE 2 LAN 1 CONSOLE
FF-120/220
MultiTech Systems, Inc.
Cabling Instructions
Power Cable
Receptacle
RESET
Lock Nut
11