Multitech FaxFinder FF120 Cabling Manual page 15

FaxFinder Cabling Guide
4. Connect to Telephony Service
The FaxFinder's fax modems can either be connected to a PBX
(for use in Automated Routing Mode) or to a POTS line
(for use in Manual Routing Mode).
Connection for
Automated Routing Mode
Plug one end of the phone
cable into the FaxFinder's
LINE jack and the other
into an available Station
Port on the PBX.
One RJ11-to-RJ11 cable is included for each port of your
FaxFinder (1 for FF120, 2 for FF220; 4 for FF420; 8 for FF820).
Automated Routing Mode
1 2 3 4 5 6 7 8 ETHERNET
MultiTech Systems, Inc.
Cabling Instructions
Connection for
Manual Routing Mode
Plug one end of the phone
cable into the FaxFinder's
LINE jack and the other end
into your standard telephone
receptacle.
COMMAND
Manual
Routing
Mode
LINE 1 LINE 2 LAN 1 CONSOLE
RESET
15