Siemens MAGNETOM Avanto Operator's Manual page 78

3 MR system components
Adjusting the monitor tilt
Adjusting the monitor height
Operating the footswitch
78
The monitor height and tilt can be adjusted for easy and comfortable
operation.
1 Release the locking lever by turning it counter-clockwise by 90°.
2 Press lightly against the upper or lower edge of the display to move
the monitor into the desired tilt position.
1 Turn the wheel clockwise to raise the monitor.
2 Turn the wheel counter-clockwise to lower the monitor.
The footswitch is used to start and stop the MR measurement in the
examination room.
(1) Hose
(2) Hose connector
(3) Pushbutton unit
(4) Footswitch Start/Stop
For additional support, labels can be affixed to the footswitches.
Start label
Stop label
MR System | Operator Manual
Print No. MR-01501G.621.02.02.02