Performing - Siemens MAGNETOM Avanto Operator's Manual

MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
Print No. MR-01501G.621.02.02.02
Name
Internal contact
External contact
The measurement sequence is triggered by the rising edge of the
external signal.
The external trigger signal can be supplied via the connections in the
magnet cover.

Performing

4.6.2
1 Connect the source of the external trigger signal to the cinch jack
trigger input (magnet cover, left).
2 Perform external triggering. See:
Physiological imaging
Value
+
-
Software operator manual
4
103