11.2 Operation with the hand-held IR transmitter 6010-25
The operation depends on the type of flush-mounting device used in combination
with the Presence Watchdog. The functionality is identical with the functionality
of the operation via pushbuttons.
● Set the hand-held transmitter 6010 to the blue range. Channel 6 (and 7 in the
case of 6402 U) is used for switching (and controlling).
● Point the hand-held transmitter directly at the Presence Watchdog.
The operation with the hand-held IR transmitter is not possible until 1 minute
after the Presence Watchdog has been installed.
The IR reception is guaranteed only if you are directly under the
Presence Watchdog with the hand-held IR transmitter 6010.
35 ENG