Table of Contents
Advertisement
Available languages
Available languages
ENG 26
9.2.4
Test mode
The test mode overrides all the other settings of the Presence Watchdog and is
used to test the functionality and the detection range.
If the Presence Watchdog detects a movement in the room, it switches the light
on for a light-on time for approx. 2 seconds, regardless of the brightness.
● Please walk around in order to test the detection ranges. You can use the
supplied film (see chapter 8.3) to limit the detection ranges.
● When the Presence Watchdog has switched on the light, remain in you
position until it switches the light off.
Advertisement
Chapters
Table of Contents
