Potentiometer Setting At The Slave - Busch-Jaeger Busch-Wachter DualLINE 6813/11 Series Operating Instructions Manual

31 ENG

10.1.2 Potentiometer setting at the slave

Please set the potentiometers as follows:
"Time" potentiometer to "% Lux" potentiometer to "Lux" potentiometer to
"short-time pulse ( )" any setting except for "T"
"daytime operation (
)"
In the event of a simultaneous pulse from a pushbutton and a
slave, the master/slave operation overrides the pushbutton
operation.
Behaviour in the "semiautomatic" mode: The extension unit (slave)
transmits only "post-triggering signals" to the main unit (master).
The turn-on is realised solely through pushbuttons.