ENG 22
9.2
Potentiometer
The switching behaviour of the Presence Watchdog can be adjusted prior to the
installation with three potentiometers (see also chapter 6, item 4). After the
installation, the best way to adjust the brightness limit is to use the hand-held IR
transmitter 6010 (see chapter 11.2).
(Time)
Potentiometer for
operating mode:
Light-on time for
● Semiautomatic mode
(HA), see chapter
9.2.1
● Automatic mode (A),
see chapter 9.2.2
● Short-time pulse (
), see chapter 9.2.3
(% Lux)
Potentiometer for:
● Test mode (T), see
chapter 9.2.4
● Brightness switching
threshold, output 2,
see chapter 9.2.6
(Lux)
Potentiometer for:
● Brightness switching
threshold, output 1,
see chapter 9.2.5