Constant Light Control - Busch-Jaeger Busch-Wachter DualLINE 6813/11 Series Operating Instructions Manual

ENG 32

10.1.3 Constant light control

This comfortable operating mode is possible only in combination with the flush-
mounting inserts 6593 U and 6550U-101. The brightness level in the room is
kept constant at a predefined value regardless of the current brightness of the
outside light.
● Set the desired brightness value on the "Lux" potentiometer.
● Slip the Presence Watchdog back on the flush-mounting insert, in order to
check the effects of the selected brightness value. 1 minute after it has been
slipped back on, the Presence Watchdog is ready for operation.
or
● Adjust the value by pressing the normally-open contact button of the extension
unit for a long time (see chapter 11.1).
or
● Adjust the desired value with the hand-held IR transmitter 6010 (see chapter
11.2).