Siemens SIMATIC ET 200SP HA Equipment Manual page 70

Technical specifications
Article number
•
•
•
Diagnostics indication LED
•
•
•
•
•
Potential separation
Potential separation channels
•
•
•
Isolation
Isolation tested with
Standards, approvals, certificates
Highest safety class achievable in safety mode
•
•
•
Probability of failure (for service life of 20 years
and repair time of 100 hours)
Ambient conditions
Ambient temperature during operation
•
•
•
•
Dimensions
Width
Height
Depth
Weights
Weight, approx.
70
– parameterizable
Monitoring of encoder power supply
Wire-break
Short-circuit to M
MAINT LED
Monitoring of the supply voltage (PWR-LED)
Channel status display
for channel diagnostics
for module diagnostics
between the channels
between the channels and backplane bus
between the channels and the power supply
of the electronics
Performance level according to ISO 13849-1
Category according to ISO 13849-1
SIL acc. to IEC 61508
– Low demand mode: PFDavg in accord‐
ance with SIL3
– High demand/continuous mode: PFH in
accordance with SIL3
horizontal installation, min.
horizontal installation, max.
vertical installation, min.
vertical installation, max.
6DL1136-6BA00-0PH1
Yes
Yes; channel by channel
Yes; channel by channel, optional protective circuit
for preventing wire-break diagnostics in the case of
simple encoder contacts: 18 kOhm to 30 kOhm,
typical 26 kOhm
Yes; Encoder supply to M, channel by channel
Yes; Yellow LED
Yes; green PWR LED
Yes; green LED
Yes; red LED
Yes; green/red LED
No
Yes
No
1 500 V DC/1 min, type test
Up to PLe
Cat. 4
Up to SIL 3
< 3.00E-05
< 2.00E-09 1/h
-40 °C
70 °C
-40 °C
60 °C
22.5 mm
115 mm
138 mm
210 g
Equipment Manual, 08/2021, A5E45647528-AD
F-DI 16x24VDC HA