Wiring
4.1
Terminal blocks for the I/O module
Terminal blocks
You can operate the I/O module with the following terminal blocks:
Article No.
6DL1193-6TP00-0DH1
6DL1193-6TP00-0BH1
6DL1193-6TP00-0DP0
6DL1193-6TP00-0BP0
6DL1193-6TP00-0DN0
6DL1193-6TP00-0BN0
6DL1193-6TP00-0DM1
6DL1193-6TP00-0BM1
The terminal block is not included in the scope of delivery of the I/O module and must be ordered
separately.
Provisions for IO redundancy
• With a redundant configuration, you need to ensure that not only one I/O module is
• When plugging a I/O module in a redundant configuration, you must ensure that you use
(FDIW-013)
F-DI 16x24VDC HA
Equipment Manual, 08/2021, A5E45647528-AD
Color
Light gray
Dark gray
Light gray
Dark gray
Light gray
Dark gray
Light gray
Dark gray
WARNING
permanently operated on the terminal block.
identical module types.
Description
For single operation
"Enable new potential group"
For single operation
"Use potential group of the left module"
Double-width terminal block with L+ potential distributor
For single operation only
"Enable new potential group"
Double-width terminal block with L+ potential distributor
For single operation only
"Use potential group of the left module"
Double-width terminal block with M potential distributor
For single operation only
"Enable new potential group"
Double-width terminal block with M potential distributor
For single operation only
"Use potential group of the left module"
For redundant configuration
"Enable new potential group"
For redundant configuration
"Use potential group of the left module"
4
13