Components; Recharging; Connection - Mpio FL 500 User Manual

Components

Player Earphones
User's Manual Instructions
Necklace Belt Clip

Recharging

Charging the battery while the power is on/off
If the charge is insufficient, the low battery message appears on the LCD screen,
and you must charge the battery.
Connect the product to the USB port on the computer with the USB connector as in
the figure.
The USB connector connection screen is displayed on the LCD
screen.
USB connection screen when the power is ON/OFF
When the USB connector is connected and no data is transfe-
rred from the portable disk, a CHARGING image appears on
the LCD and the battery starts to charge.
4
USB Cable Utility CD
Product Warranty
Note
Actual player's components may vary
slightly from images shown, and sub-
ject to change without notice.
Broken components may be purchased
separately at MPIO Service Center.
Additional components(For example,
Earphones, Belt Clip & Necklace) can
differ depending on the sales area.
(Figure.1)
Do not disconnected!!!
(Figure.1)