Installing Usb Driver Manually; Using A Removable Disk; Downloading/Uploading Files - Mpio FL 500 User Manual

Installing USB Driver Manually

Please refer to the below paragraph only if the device is not plugged with Windows 98SE
Connect the product (FL500) to a computer with the USB cable.
1
When Add New Hardware Wizard window appears on the screen, click the [Next]
button.
Check "Search for the driver for your device", click the [Next] button.
2
Insert the CD included in the package into the CD-ROM, check CD-ROM DRIVE and
3
click the [Next] button.
When the driver installation is completed, the "Installation complete" window will
4
appear on the screen. Then, click the [Finish] button.
Go to the following destination to confirm that the installation was completed suc-
cessfully.
Windows 98SE:
[Control Panel] → [Systems] → [Device Manager] → [Hard Drive] → MPIO FL500 USB
Device
Note
In Windows 98SE, the program must be installed to use FL500 as a removable disk.
Please install the USB driver before use.

Using a Removable Disk

Downloading/Uploading Files

You can connect to the PC with the USB cable while the product (FL500) is on or off.
1
If connected, a connection icon will appear on the LCD screen.
If connected in MTP mode, press the MENU button shortly to switch to MSC mode.
Run Windows Explorer on the PC
2
A Removable Disk Drive (FL500) Icon will be created in Windows Explorer.
7