Table of Contents
Advertisement
Approximately two litres (three pints) is required to
bring the level from Min. to Max.
4. Repeat from step 1 to check the level.
Windscreen Blade Replacement
To replace the windscreen wiper blades lift a wiper
arm (A) up to access the two grub screws (C). Loosen
each grub screw (use a T20 torx head allen key) to
allow the wiper blade (B) to slide out from its holder.
Slide in a new wiper blade and tighten the two grubs
screws to secure the wiper blade in place.
Brake Pad 'Bedding-in'
Warning: Track day use and high speed driving:
For track use or high speed driving new brake pads
must be subject to specific conditioning. Failure to
correctly condition the pads may result in greatly
reduced brake performance. Contact you Aston
Martin Dealer.
Failure to 'bed-in' new brake pads will result in
reduced brake performance and possible brake
judder or squeal.
After the installation of new brake pads, brake
performance will be reduced, as the brake discs and
pads need to be 'Bedded-in'. For the first few hundred
kilometres of new brake pad use, avoid excessive
braking (hard stops from high speed, alpine descents,
etc.).
8.15
Advertisement
Chapters
Table of Contents
