Manual Operation - Aston Martin One-77 2010 Owner's Manual

Manual Operation

Set the required:
• Fan speed
• Temperature
• Air flow
The fan speed and temperature setting will show
on the infotainment DISPLAY.
When using the air conditioner, mist may come
out from the vents. This is not a sign of trouble but a
result of humid air being suddenly cooled.
Setting the temperature to maximum high or low
will not provide the required temperature at a faster
rate. To prevent cool air blowing from the vents when
heating immediately after starting a cold engine, the
amount of airflow is reduced until the air warms up.
The vehicle heater will continue to produce the
selected temperature regardless of in-vehicle
conditions.
If dehumidifying is required, press the A/C button
(button LED ON). To stop dehumidifying press A/C
button (button LED OFF).
When maximum cooling is required, set the
TEMPERATURE dial to the extreme cold position and
press the AIR CIRCULATION button to the re
circulated air position (
DISPLAY), then set a fast fan speed.
Defrost and Demist
To defrost or demist the windscreen on vehicle
start up in extreme cold weather conditions,
operate the engine at 1500 rpm. Always make sure
that the park brake is applied.
Press A/C. Press the
Set the required:
• Temperature
• Fan speed
If the engine is cold the air conditioning will not
start up until the engine has started to warm up.
For maximum defrost or demist set the
temperature and fan speed dials to maximum.
will show in the
airflow button.
6.7