Brother ADS-4300N Online User's Manual page 256

5. Press the upper left side of the Brake Roller Cover downwards and pull it down.
6. Hold the Brake Roller shaft and pull it towards you, and then remove the Brake Roller by pulling it out and to
the right.
1
2
7. Clean the Brake Roller with a soft lint-free cloth slightly moistened with water.
8. Insert the Brake Roller into the shaft, and then insert the Brake Roller into the machine.
2
1
9. Close the Brake Roller Cover.
10. Clean the Pick Up Rollers from side to side with a soft lint-free cloth slightly moistened with water.
11. Close the Front Cover and attach the ADF.
12. Press to turn the machine on.
NOTE
(ADS-4700W)
251