Brother ADS-4300N Online User's Manual page 35

Home > Paper Handling
Should Not Be Perforated
Document Areas That Should Not Be Perforated
Avoid perforating or punching holes in the shaded area shown in the illustration. Doing so will cause a scanning
error.
7
5
1. ADS-4900W: 45 mm
ADS-4300N/ADS-4700W: 80 mm
2. Top
3. Bottom
4. Centre
5. Feed direction
6. Front side
7. Reference point
• This condition applies when the document is set in the centre of the Pick Up Roller.
• If there are holes punched, or other paper taped or otherwise attached in the shaded area, multifeed
detection may not be performed. For more information about multifeed detection, see Related
Information.
Related Information
• Unacceptable Documents
Related Topics:
• Multifeed Detection
> Document Specifications
1
6
4
> Unacceptable Documents
2
3
> Document Areas That
30