Brother ADS-4300N Online User's Manual page 227

Error Message
Scheduled Maintenance
Alert
Sending Error
(ADS-4700W/ADS-4900W)
Server Time out
Unusable Device
USB Access Error
USB hub not supported
Wrong Network Key
Related Information
• Troubleshooting
• Error Messages When Using the Brother Web Connect Feature
Related Topics:
• Use Secure Function Lock 3.0
• Clean the Scanner and Rollers
• Replace the Roller Kit (ADS-4300N/ADS-4700W)
• Replace the Roller Kit (ADS-4900W)
• Set up a Scan to Network Profile
• Set up a Scan to FTP Profile
• Set up a Scan to SFTP Profile
• Set up a Scan to SharePoint Profile
• Document Jam
• Configure Scan to Workflow Settings Using Brother iPrint&Scan
Cause
The Pick Up Roller has been used over
5,000 times.
The Scan to FTP/SFTP profile, Scan to
Network profile, Scan to SharePoint
profile, or Scan to Email Server is not
configured correctly.
The machine was disconnected from the
Scan to FTP/SFTP profile, Scan to
Network profile or Scan to Email Server.
An unusable device is inserted in the USB
port.
The inserted USB flash drive is write-
protected.
The USB flash drive was removed while it
was being accessed.
A USB flash drive with a hub is inserted in
the USB port.
The Network Key is incorrect.
Action
See Related Information: Replace the
Roller Kit.
Clean the Brake Roller and Pick Up
Roller. Paper jams and reduced scan
quality issues may occur if you do not
clean them.
See Related Information: Clean the
Scanner and Rollers.
Make sure the Scan to FTP/SFTP profile,
Scan to Network profile, Scan to
SharePoint profile, or Scan to Email
Server is configured correctly.
Configure the Network Settings.
Make sure the Scan to FTP/SFTP profile,
Scan to Network profile or Scan to Email
Server is configured correctly.
Configure the Network Settings.
Remove the device. Turn the machine off
by unplugging the machine from the
electrical socket, and then plug the
machine in again. Press
machine on.
Use a USB flash drive that is not write-
protected.
Insert the USB flash drive.
Remove the unsupported device from the
USB port.
Confirm the Network Key and try again.
to turn the
222