Analog Input With Hart - Single Ended - Honeywell Experion 8 Series Technical Information

Series 8 Controller and I/O Specification, S803-150-500
3.3.2. Analog Input with HART – Single Ended
Function
The Analog Input Module accepts high level current inputs from transmitters and sensing devices.
Notable Features

Extensive self-diagnostics

Optional redundancy

HART-capable, multivariable devices

Fast loop scan

Internal or external field power selection
Detailed Specification- Analog Input with HART (8C-PAIHA1)
Parameter
Input / Output Module
IOTA Modules
Input Type
Input Channels
A/D Converter Resolution
1
Input Range
Voltage Rating
Module Current Rating
Common Mode Rejection Ratio, dc to
60 Hz (500  source imbalance)
Common Mode Voltage, dc to 60 Hz
Normal Mode Rejection Ratio, at 60 Hz
Normal Mode Filter Response
Maximum Normal Mode Input
Crosstalk, dc to 60 Hz (channel-to-
channel)
Maximum Input voltage (any input
referenced to common, no damage)
Input Scan Rate
Hardware Accuracy (@ CMV = 0 V)
Version 1

On board excitation power (no need for marshalling
power)

Suitable for Configure / Status for HART Device

Galvanic Isolation
Specification
8C-PAIHA1 - Analog Input with HART (16), Coated
8C-TAIXA1 Non Redundant, Coated
8C-TAIXB1 Redundant, Coated
Current (2-wire or self-powered transmitters)
16 Channels (Single Ended type)
16 bits
4-20 mA (through 250 Ω)
24 VDC
110 mA
70 dB
-6 to +5 V peak
19 dB
Single-pole RC, -3 dB @ 6.5 Hz
± 30 Volts
-60 dB
± 30 Volts
50 ms
± 0.075% of full-scale (23.5°± 2°C)
± 0.15% of full-scale (0 to 60°C)
20
6"
12''
July 2017