Table of Contents
Advertisement
Series 8 Controller and I/O Specification, S803-150-500
3.3.3.
Analog Input – Single Ended
Function
The Analog Input Module accepts high level current inputs from transmitters and sensing devices.
Notable Features
Extensive self-diagnostics
Optional redundancy
Fast loop scan
Internal or external field power selection
Detailed Specification- Analog Input (8C-PAINA1)
Parameter
Input / Output Module
IOTA Modules
Input Type
1
Input Channels
A/D Converter Resolution
Input Range
Voltage Rating
Module Current Rating
Common Mode Rejection Ratio, dc to
60 Hz (500 source imbalance)
Normal Mode Rejection Ratio, at 60 Hz
Normal Mode Filter Response
Maximum Normal Mode Input
Crosstalk, dc to 60 Hz (channel-to-
channel)
Maximum Input voltage (any input
referenced to common, no damage)
Input Scan Rate
Hardware Accuracy (@ CMV = 0 V)
Galvanic Isolation (any input terminal
voltage referenced to common)
Version 1
Specification
8C-PAINA1 - Analog Input with HART (16), Coated
8C-TAIXA1
8C-TAIXB1
Current (2-wire or self-powered transmitters)
16 Channels (Single Ended type)
16 bits
4-20 mA (through 250 Ω)
24 VDC
105 mA
70 dB
19 dB
Single-pole RC, -3 dB @ 6.5 Hz
± 30 Volts
-60 dB
± 30 Volts
50 ms
± 0.075% of full-scale (23.5°± 2°C)
± 0.15% of full-scale (0 to 60°C)
1000VAC RMS or ±1000 VDC
2
On board excitation power (no need for
marshalling power)
Galvanic Isolation (System to Field only with
external user supplied power)
Non Redundant, Coated
Redundant, Coated
22
6"
12''
July 2017
Advertisement
Table of Contents
