Honeywell Experion 8 Series Technical Information page 35

Series 8 Controller and I/O Specification, S803-150-500
On-State Voltage
Off-State Leak Current
Turn-On/Turn-Off Time
Gap (0 current) of Output to Field on
Switchover
Module Removal and Insertion
Under Power
Note 1 – Short circuit protection for DO channel would be using series FUSEs in the output channel. Total four (4) fuses for 32
channels on DO IOTA
Note 2 – System to Field type isolation, option available only with external user supplied power. A wiring option on the IOTA
determines if outputs are referenced to the Series 8 system power or an external field power source
Version 1
24 VDC (typ) (load current @ 0.1A max)
5 µA (max)
10 ms (max)
None (0ms) (applies to Redundancy only)
Supported
35
July 2017