Behavior In Case Of Faults; Maintenance / Checking - Siemens CALOMAT 6 Instructions Manual

Siemens AG
3.4

Behavior in case of faults

Fault
The procedure in case of faults is described in the device operating manual /1/.
Repairs
Defective devices should be sent to the Repair Department with details of the
fault and the cause. When ordering replacement devices, please specify the serial
number of the original device. The serial number can be found on the
nameplate.
Reference
The address of the responsible repair center, contact, spare parts lists etc. can be
found in the Instruction Manual CALOMAT 6E/F at chapter 8.2 ("return delivery").
Or look at following web addresses:
www.siemens.com/automation/services&support
www.automation.siemens.com/partner
3.5

Maintenance / Checking

Checking function
We recommend that the functioning of the CALOMAT 6 is checked at regular
intervals of one year.
Check at least the following:
Test the basic functionality of the CALOMAT 6 as described in the Instruction
Manual /1/.
11 Safety Manual CALOMAT 6 Gas Analyzers
07/2010, A5E00729184-02