Behavior In Case Of Faults; Maintenance / Checking - Siemens ULTRAMAT 6 Safety Manual

Siemens AG
3.4

Behavior in case of faults

Fault
The procedure in case of faults is described in the device operating manual
/1/.
Repairs
Defective devices should be sent to the Repair Department with details of the
fault and the cause. When ordering replacement devices, please specify the
serial number of the original device. The serial number can be found on the
nameplate.
Reference
The address of the responsible repair enter, contact, spare parts lists etc. can
be found in the Instruction Manual ULTRAMNAT 6E/F, OXYMAT 6E/F at
chapter 8.2 ("return delivery").
Or look at following web addresses:
www.siemens.com/automation/services&support
www.automation.siemens.com/partner
3.5

Maintenance / Checking

Checking function
We recommend that the functioning of the ULTRAMAT 6 is checked at regular
intervals of one year.
Check at least the following:
Test the basic functionality of the ULTRAMAT 6 as described in the Instruction
Manual /1/.
11 of 19 SIL Safety Manual ULTRAMAT 6 Gas analyzers
A5E00729183-02