How To Install Your Remote Control - Fanimation KLINCH FPS7679 Series Manual

How to Operate Your Ceiling Fan (Continued)
5.
Remote functions: (Figure 5)
• Indicator LED light: fan speed
• button: Turns fan off.
• Fan Speed:
Turns fan on and turns speed up.
Turns fan on and turns speed down.
• Light button: Turns light on and off.
Increases light output level.
Decreases light output level.
• Sleep Timer:
Tap and the fan and light will turn off after
1 hour.
Tap and the fan and light will turn off after
3 hours.
Tap and the fan and light will turn off after
6 hours.
6. If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reverse switch on top of motor
assembly to the opposite position and turn fan on
again. (Figure 6)
Reverse Switch Information
Season Rotation Direction
Summer Counterclockwise
Winter Clockwise

How to Install Your Remote Control

1. Installing Wall Holder: (Figure 1)
Attach wall holder using the two provided screws.
Switch Position
Left
Right
14
Figure 5
Reverse
Switch
Figure 6
Figure 1
Screws (2)
Wall Holder