How To Install Your Remote Control; Maintenance; How To Clean Your Ceiling Fan Blades - Fanimation BLITZ LP8377 Series Manual

How to Operate Your Ceiling Fan (Continued)
• Fresh Air: Fan speed will modulate to simulate
a natural breeze.
• Safe Exit: Tap once, the light will blink once; fan
and light will turn off after 1 minute. Pressing any
button will cancel this feature.
• Reverse button:
In order to reverse the direction of the fan, the fan
must be running.
Summer- The fan runs counterclockwise. Airflow
will provide a downward cooling breeze.
Winter- The fan runs clockwise. Airflow will force
warm air downward without a noticeable breeze.
1. Installing Wall Holder: (Figure 1)
Attach wall plate using the two provided screws.
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.

How to Clean Your Ceiling Fan Blades

Periodic light dusting of the blades is recommended.
A feather duster will work best.

How to Install Your Remote Control

Maintenance

Screws (2)
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the blades.
16
Figure 1
CAUTION
Wall Holder