How to Operate Your Ceiling Fan (Continued)
6.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Remove the light shade or steel cap then slide the
reverse switch of on the light plate assembly to the
opposite position and turn fan on again. Assemble
the light shade or steel cap to the switch housing
assembly by twisting in a clockwise direction.
(Figure 6)
Reverse Switch Information
Season
Rotation Direction
Summer
Counterclockwise
Winter
Clockwise
1.
Installing Wall Holder: (Figure 1)
Attach wall holder using the two provided screws.
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
How to Clean Your Ceiling Fan Blades
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Switch Position
Left
Right
How to Install Your Remote Control
Maintenance
Reverse
Switch
Light Plate
Assembly
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the blades.
16
Figure 6
Screws (2)
Wall Holder
Figure 1
CAUTION