CAUTION
Improper robot connection can result in loss of power to the robot arm.
• Do not disconnect the Robot Cable when the robot arm is turned on.
• Do not extend or modify the original Robot Cable.
4.3. Robot Connection: Base Flange Cable
This subsection describes the connection for a robot arm configured with a Base Flange Cable
connector. For information on connecting a robot arm configured with a fixed 6 meter Robot Cable,
see
4.2. Robot Connection: Robot Cable on the previous
4.3.1. Base Flange Cable connector
Establish the robot connection by connecting the robot arm to the Control Box with the Robot
Cable. The Robot Cable connects to the Base Flange Cable connector and to the Control Box
connector.
You can lock each connector when robot connection is established.
CAUTION
The maximum robot connection from the robot arm to the Control Box is 12 m.
Improper robot connection can result in loss of power to the robot arm.
• Do not extend a 6 m Robot Cable.
NOTICE
Connecting the Base Flange Cable directly to any Control Box can result in
equipment or property damage.
• Do not connect the Base Flange Cable directly to the Control Box.
e-Series Control Box
page.
User Manual