How To Use The Function Key; How To Output To External Equipment - Furuno FE-800 Operator's Manual

Navigational echo sounder

Hide thumbs Also See for FE-800:

Table of Contents

1.12

How to Use the Function Key

The function key can store and recall a preset location in the menu. You can recall the function by

pressing the FUNC key.

To store a function

1. Navigate the menu to the function you wish to store.

2. Press and hold the FUNC key to store the menu function. A small asterisk "*" will appear next

to the menu item when it is stored.

In the example below, [Manual GAIN] is stored to the FUNC key.

Menu item stored

3. Release the FUNC key after the asterisk "*" appears.

4. Press the DISP key to return to the main display.

1.13

The FE-800 can output depth information from one transceiver to external equipment, such as

ECDIS. To select the transceiver which will output to the external equipment, do the following:

1. Press the MENU/ESC key to open the Main menu.

2. Select [Output Depth] using  or , then press the ENT key.

3. Select [FORE] or [AFT] as appropriate, then press the ENT key.

The selected transceiver is highlighted as shown in the figure below.

4. Press the MENU/ESC key once to close the menu.

to function key.

Transceiver selected for external output

is highlighted with green arrows.

1. OPERATION

Table of Contents