How To Use The Function Key; How To Output To External Equipment - Furuno FE-800 Operator's Manual

1.12

How to Use the Function Key

The function key can store and recall a preset location in the menu. You can recall the function by
pressing the FUNC key.
To store a function
1. Navigate the menu to the function you wish to store.
2. Press and hold the FUNC key to store the menu function. A small asterisk "*" will appear next
to the menu item when it is stored.
In the example below, [Manual GAIN] is stored to the FUNC key.
Menu item stored
3. Release the FUNC key after the asterisk "*" appears.
4. Press the DISP key to return to the main display.
1.13

How to Output to External Equipment

The FE-800 can output depth information from one transceiver to external equipment, such as
ECDIS. To select the transceiver which will output to the external equipment, do the following:
1. Press the MENU/ESC key to open the Main menu.
2. Select [Output Depth] using
3. Select [FORE] or [AFT] as appropriate, then press the ENT key.
The selected transceiver is highlighted as shown in the figure below.
4. Press the MENU/ESC key once to close the menu.
to function key.
or , then press the ENT key.
Transceiver selected for external output
is highlighted with green arrows.
13
1. OPERATION