How To Adjust The Dimmer Presets - Furuno FE-800 Operator's Manual

Note 2: When the transducer selected for echo
display output and depth display differ, a pop-up
message similar to the one shown to the right is
displayed. To use the same transducer for information displayed, match the settings for [Output
Depth] on the Main menu with the setting selected at section 1.21.1.
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using  or , then press the ENT key.
3. Select [Depth] using  or , then press the ENT key. The pop-up window
shown to the right appears.
4. Select [SINGLE] or [DUAL] as appropriate. When [DUAL] is selected, the sec-
ondary depth reading is displayed in a box at the bottom of the display.
5. Press the DISP key to close the menus.
1.21.3

How to adjust the dimmer presets

You can change the presets for background color and key and panel brilliance when [Dimmer
Mode] in the [System] menu is set to [ECDIS]. These preset are also applied when Day/Dusk/
Night is changed from external equipment.
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using  or , then press the ENT key.
3. Select [Dimmer Preset] using  or , then press the ENT key.
4. Select the item as appropriate using , then press the ENT key. Press
 or  to select the desired setting, then press the ENT key.
5. Press the DISP key to close the menus.
Secondary depth reading
20
1. OPERATION