Retrieving Display Values From Measurement Devices - SMA FUEL SAVE CONTROLLER 2.0M User Manual

SMA Solar Technology AG
Display value
Reactive power set-
point
Energy fed in
Operational state
Device Error
Procedure:
1. To do this you must be logged in as Installer: Go to the menu Plant Overview via the page and menu selection.
2. Choose Stations > PV System via the page and menu selection.
☑ The designations of all the inverters are displayed in the page and menu selection.
3. Select the desired inverter via the page and menu selection.
6.4

Retrieving Display Values from Measurement Devices

The values obtained from the measurement modules of the Fuel Save Controller are displayed on the Measurement
system overview page.
User Manual
Description
Setpoint for the current reactive
power as a ratio of nominal
power, in %
Grid feed-in: Energy fed into the
hybrid grid in MWh
Current operating mode of the in-
verter
Error in the inverter
Value Explanation
– –
– –
STOP The inverter is switched off.
WAIT FOR DC The inverter is waiting for DC in-
put voltage.
WAIT FOR AC The inverter is waiting for an
available local grid at the AC
output.
COM ERROR Communication between inverter
and Fuel Save Controller has
failed.
WAIT FOR The inverter is waiting for a set-
SETPOINT point from the Fuel Save Con-
troller.
IN OPERATION The inverter is feeding in.
WARNING A warning has occurred in the in-
verter.
ERROR An error has occurred in the in-
verter.
– See inverter documentation
6 System Monitoring
FSC20-BA-en-10 29