Operating The Motion Digitizer Pen - Motion Computing M1200 User Manual

IMPORTANT: You can put the Tablet PC in either Stand By or Hibernate to swap the
battery. See the section "Swapping the Battery" in this chapter.
Launching Stand By from the Motion Dashboard
Open the Motion Dashboard and then tap the Stand By button.
Setting Up Stand By or Hibernate from the Power Switch
When you slide the power switch, by default it shuts down your Tablet PC.
You can change this so you start Stand By or Hibernate from the power
switch. To do this:
Restarting from Stand By or Hibernate
To restart from Stand By or Hibernate, briefly slide the Power switch until
the display Tablet PC starts up. Tap your user name to resume work.
O
The Motion Digitizer Pen contains internal
PERATING THE
M
electronics that make the Pen the only way you
OTION
D P
input information on the Tablet PC display.
IGITIZER EN
Finger-tapping or writing with a PDA stylus has
no effect. The Pen contains a Pen function button,
used for right-clicking (like a mouse) and a small opening near the end for
attaching it to the Pen tether. The Pen also comes with replacement Pen tips
and a replacement tool, shown here. For information about replacing the Pen
tips, see "Replacing the Pen Tips" in this chapter.
Notations for using Motion Pen are described below:
•
•
•
•
•
•
1. Open the Motion Dashboard.
2. On the Dashboard, under Power Management, tap the down arrow by
the Pwr Button.
3. From the drop-down menu, select Stand By or Hibernate, as desired.
4. Select OK.
Tap — Tap the Pen on the Tablet PC display, without pressing the func-
tion button on the Pen
Double-tap — Double-tap the Pen on the display, without pressing the
function button on the Pen
Right-click — Press the function button on the Pen and tap the Pen on
the display (equals a mouse right-click). For more information about
using the Pen function button, see the section "Writing with the Pen" in
this chapter.
Press and hold — Press and hold the tip of the Pen to the display without
pressing the Pen function button (equivalent to a mouse right-click)
Tap and drag — Tap and drag the Pen on the display
Select/Highlight — Tap on the item on the Tablet PC display with the
Pen to activate the function
Chapter 4 Using Your Motion Tablet PC
Motion Computing Tablet PC User Guide 32