Opening The Motion Dashboard; Launching Stand By Or Hibernate From The Start Button - Motion Computing M1200 User Manual

O In the following sections, you will be instructed to open the
PENING THE
M
Motion Dashboard. To do this, press Hot Key #1 (see Table 2-2)
OTION
D
on the Tablet PC front panel.
ASHBOARD
You can also access
Dashboard by first
selecting Start, All
Programs, and then
Motion Resources.
The Motion Dashboard
offers many Tablet PC
functions in a
convenient location.
C
Low-power Stand By or Hibernation modes can conserve Tablet PC power.
ONSERVING
P W
Each preserves your Tablet PC settings so you can resume work where you
OWER ITH
S B
left off.
TAND Y
H
OR IBERNATE
•
•

Launching Stand By or Hibernate from the Start Button

To quickly place your system in Stand By or Hibernate:
system is completely unresponsive to software commands. If you have any
applications open or any unsaved work, you will lose it. Windows will not prompt
you to save your work if you force a shutdown.
Stand By — Greatly reduces Tablet PC power consumption and restarts
from within a few seconds; the Tablet runs on battery if not connected to
AC power. The Tablet PC r. Choose Stand By when you plan to return to
work within a short time (a few minutes to a few hours) and want to con-
serve power.
Hibernate — Completely shuts down the Tablet PC to conserve power.
It takes slightly longer to restart from Hibernate than from Stand By.
Choose Hibernate when you plan to stop work for longer periods of time,
such as overnight. Saves the system status of the
Tablet PC to the hard disk drive.
1. Select Start/Turn Off Computer.
2. From the pop-up window, tap Stand By or press the Shift key on the
keyboard to toggle to Hibernate, and then tap that option.
3. The Tablet PC will then enter Stand By or Hibernate. In Stand By,
the power LED will flash green. In Hibernate, all LEDs are off.
Chapter 4 Using Your Motion Tablet PC
Motion Computing Tablet PC User Guide 31