Table of Contents
Advertisement
largest datagram that can be sent over a network. The
default value is 1492. Do NOT modify it unless necessary,
but if a specific website or web application software
cannot open or be enabled, you can try to change the
MTU value to 1450, 1400, etc.
Service Name:
that are applied to a PPPoE connection. Enter it if
provided. Do NOT modify it unless necessary.
AC Name: Enter it if provided. Do NOT modify it unless
necessary.
Connect Automatically: Connect automatically to the
Internet after rebooting the system or connection
failure.
Connect Manually: Connect to the Internet by user
manually.
Connect on Demand: Re-establish your connection to
the Internet after the specific time (Max Idle Time). Zero
means you are connected to the Internet all the times.
Otherwise, enter the minutes to be elapsed before you
are disconnected from the Internet.
Connect on Fixed Time: Connect to the Internet
during the time you set.
Notice:
The "Connect on Fixed Time" can be deployed only
when you have set the current time in "Time
11N Wireless Broadband Router
It is defined as a set of characteristics
24
Advertisement
Table of Contents
